Page 1 of 1

Help you set up your computer more smoothly & recommend software!

Posted: Wed Jan 08, 2025 4:05 am
by aminaas1575
WINDOWS has been around for almost 40 years, and computers have been popular for about 20-30 years. Do you think you are already good at setting up computers?

Here we introduce some functions and settings to see if they can help you use your computer more smoothly!

Set up computer cover image


1. Automatically start up when power is restored after a power outage.
If you are a user who often turns on and hangs up the computer, but you are afraid that it will not automatically turn on after a power outage, you can turn on the advanced power of the BIOS to Power On or Last State. Usually this The setting value will be in [Advanced]>[APM Configuration] or [Advanced Power Settings Management] in the BIOS settings.

Usually there are three options for setting values:



[Power Off]: If the power supply is interrupted and then connected again, the computer will remain off and will not automatically turn on.

[Power On]: If the power is connected again after australia whatsapp phone number a power interruption, the computer will automatically turn on without pressing the power button.

[Last State]: If the system power supply is interrupted and then connected again, the computer will return to the state before shutdown, for example:

Assume that before the power is cut off, it is in the power-on, sleep, and shutdown states. After the power is restored, it will also be in the power-on, sleep, and shutdown states.
Assuming that it was in the shutdown state before the power was cut off, it will also be in the shutdown state after the power is restored.


Usually the author sets it to Power On or Last State to maintain daily use to avoid computers and NAS from stopping during power outages or power outages.

PS ITE2 NAS has been preset to Power On! If you need to make changes, you can also refer to the following steps.