9. Click Save to apply the static IP settings
Posted: Wed Feb 12, 2025 6:40 am
Manual > IPv4
8. Fill in the IP address, subnet mask, gateway , and preferredalternate DNS servers . Be sure to select a unique IP address within your network range usually 192.168.0.2 – 254.
Enter network settings > Save
Once you have set up a static IP address, you are ready to change the NAT type.
Change NAT Type in Windows 1110
Method 1: Enable Network Discovery
Enabling network discovery makes your PC visible to georgia telegram data other devices on your network, indirectly improving your NAT type.
1. Open Settings and select Network & Internet > Advanced network settings .
Advanced network settings
2. Click " Advanced sharing settings ."
Advanced Sharing Settings
3. Open the "Private networks" section , enable " Network discovery " and check the " Automatically configure network devices " box.
4. Then turn on " Network discovery " under "Public networks" .
Enable network discovery for private and public networks.
8. Fill in the IP address, subnet mask, gateway , and preferredalternate DNS servers . Be sure to select a unique IP address within your network range usually 192.168.0.2 – 254.
Enter network settings > Save
Once you have set up a static IP address, you are ready to change the NAT type.
Change NAT Type in Windows 1110
Method 1: Enable Network Discovery
Enabling network discovery makes your PC visible to georgia telegram data other devices on your network, indirectly improving your NAT type.
1. Open Settings and select Network & Internet > Advanced network settings .
Advanced network settings
2. Click " Advanced sharing settings ."
Advanced Sharing Settings
3. Open the "Private networks" section , enable " Network discovery " and check the " Automatically configure network devices " box.
4. Then turn on " Network discovery " under "Public networks" .
Enable network discovery for private and public networks.