Test the system : Once the wire is buried and secured
Posted: Thu Jan 23, 2025 4:39 am
Determine the Route : Plan the route you want to bury the wires . Consider the layout of your yard and any specific areas you want to keep your dog away from. It is recommended to avoid burying the wires too close to large trees or dense vegetation, as tree roots or vegetation may interfere with the signal. See Also Risks of using hydrogen peroxide on dogs 3. Digging trenches ( optional ): If you prefer to bury wires.
You can use a garden trough or a small shovel to dig a shallow trench along lithuania whatsapp number list the planned route . The trench should be deep enough to accommodate the wire and prevent accidental damage . A depth of about 2-4 inches is usually sufficient . 4. Insert the wire : Once the trench is ready, gently place the wire into the trench, making sure it remains flat and straight. Be careful not to bend or kink the wire , as this will affect the performance of the fence . If you choose not to bury the wire , simply lay it in the ground and secure it with dog fence spikes .
Secure the wire : To prevent the wire from shifting or accidentally pulling out, secure it to the ground with dog fence spikes. Place staples every 10 feet or so along the wire , making sure they are nailed deep enough to secure the wire firmly in place. This step is especially important in areas with dense brush as it helps to protect and hide the wire . 6. it is important to test the system to ensure it is functioning properly. Follow the manufacturer's instructions for setting up and activating the dog fence system
You can use a garden trough or a small shovel to dig a shallow trench along lithuania whatsapp number list the planned route . The trench should be deep enough to accommodate the wire and prevent accidental damage . A depth of about 2-4 inches is usually sufficient . 4. Insert the wire : Once the trench is ready, gently place the wire into the trench, making sure it remains flat and straight. Be careful not to bend or kink the wire , as this will affect the performance of the fence . If you choose not to bury the wire , simply lay it in the ground and secure it with dog fence spikes .
Secure the wire : To prevent the wire from shifting or accidentally pulling out, secure it to the ground with dog fence spikes. Place staples every 10 feet or so along the wire , making sure they are nailed deep enough to secure the wire firmly in place. This step is especially important in areas with dense brush as it helps to protect and hide the wire . 6. it is important to test the system to ensure it is functioning properly. Follow the manufacturer's instructions for setting up and activating the dog fence system